Manuals

Trouble-shooting vacuum loss

1. Check lid for flat. Place on a countertop and press around their circumference. If it rocks more than 1/16 of an inch, slide it over the countertop edge and flex it back into shape. 

2. The bail handle should press down firmly on the hold down bracket. If it does not, pull the hold down bracket toward the inflations, raising it up and tightening the pressure on the pail lid. 

3. Check to be sure vacuum is between 10 and 12 inches while milking.

4. Check end cap gaskets on reserve tank to be sure they are seated properly.


Hoegger Belly Pail System Overview

Hoegger 35 lb System Overview

How to clean the oil lubricated Hoegger Milking Systems